Double Glazing Seal Repairs
If the seals on double-glazed windows are damaged, they can cause damp and mould. This could cause damage to the frame as well as the walls surrounding it, and also affecting your health.
It is a more cost-effective way to repair most uPVC window frames than replacing them. A glazier will typically clean the frame of the window and the glass and apply a fresh layer of sealant, then smooth it.
Water Leaks
Window seals are made to prevent water to stay out of your home. As they wear out, water can be leaking around your windows. A leaking window is not only annoying but it can cause serious damage to the surrounding structure of your home. It is crucial to spot the issue early and get it repaired by an expert before it gets worse.
The cause of windows that leak can be found in the glass, but rather on the frame or sill. A leak in this area is the most common indication of a damaged window seal. This can be due to damage to the seal caused by weather or aging or worn caulking or even a blocked drain resulting in an accumulation of water or ice.
The appearance of water between double-glazed panes can be a sign that your window seal has failed. This isn't as hazardous as a leak of water as the water does not travel far enough to reach into your home. It does mean, however, that the inert gases that are encased between your windows have escaped out. This can lower the insulation value of your window.
The last sign of a damaged window seal is condensation between the panes. This could be due to a failed seal or a damp atmosphere in your home. It could also be due to a problem with the glass. The condensation might not just be unpleasant, but it could also lead to the growth of mold and mildew within your home, which can be very difficult and costly to get rid of.
It's time to check your double-glazed windows if observe these indications. The repair or replacement of your windows will protect your home from water leaks, cut down on energy bills, and reduce draughts. It's a small cost to pay for the security and comfort of your family. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our experienced professionals are happy to help! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken double glazing seal can allow water to get into the gap that is used to insulate. The water could cause condensation within the window panes. It could also result in misting or fogging.
If you are noticing condensation inside your home It's time to call a double glazing repair service. Condensation can be an indication that the vacuum seal created at the factory failed and water has gotten into the enclosed space.
Condensation can be caused by a range of causes however, the most common cause is gaskets, sealants or insulation in the uPVC frames of the windows. There are several options for repairing double glazing seals however it is essential that the new seals are properly size to ensure a perfect seal and a tight fit.
Typically gaskets used to fill in the gaps between your double-glazed units are constructed from a material such as polyurethane foam. These are designed to last for a long time but they are susceptible to deterioration over time because of wear and tear, as well as exposure to different temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack. This creates a gap in the seal which allows moisture to creep into those areas of your double-glazed windows. This can lead to condensation and decrease in energy efficiency.
One solution to this problem is to have the windows sealed. This isn't a 100% solution as it will eliminate the condensation that is already present and not address the underlying problems that cause the double-glazed windows to leak or form condensate.
Another option is to replace your windows completely and this should be done by a professional who provides an insurance backed guarantee. This means that in the event that the company fails or goes under, you'll still be protected by the insurance. It's worth mentioning that the warranty on your replacement windows should be a minimum of 10 years.
Misting
Check that your double-glazing seals are in good condition as the autumn season draws near. Worn-out window seals are not just detrimental to the insulation properties of your windows but could also cause damp, mold and condensation. To avoid further damage to your double-glazed windows, and to save money on energy bills, it's important to repair any issues as soon as possible.
A typical double-glazed window is constructed from two panes of glass held together by an internal space that's filled with gas. An outer sealant layer then fills the gap between the uPVC frame and the glass. This is crucial to maintaining the air-tight seal that keeps warm and cold air from your home, thereby saving money on your heating bills. However, over time, these seals may fail due to age, weather conditions or even poor installation. double glazing repairs near me that makes double glazed windows so efficient could begin to deteriorate once this occurs.
If not checked or unchecked, damaged or defective seals can lead to condensation and damp that can ruin the appearance of your windows, but can also affect your health. The dampness and moisture can cause damage to walls, ceilings, floors and other surfaces in your home. They can also cause allergens and irritants that can be detrimental to your health and the health of your family.
The most common problem that double glazing suffers from is misting between the panes. This happens when moisture gets into the insulated area of your windows. It isn't easy to fix without professional double glazing repair.
DIY solutions to this issue are available, however, we recommend against them because they can be messy and cause damage to your windows. These methods involve drilling holes into your glazed units and using chemicals to eliminate the condensation and fog. This could lead to a variety of issues, including exposing your windows and units to water damage.
Professional glaziers possess the tools as well as the skills and experience to safely reseal uPVC frames. They can also provide you with lasting results. Not to mention, they can also offer suggestions on the best way to maintain your uPVC windows to avoid future issues.
Draughts
A draft coming from your window is a sign that the sealant has failed and must be replaced or repaired. This will prevent cold air from entering your home, improve the efficiency of your energy and reduce heating bills and make a difference to the comfort level and temperature control.
It is important to note that a few draughts aren't caused by window seals, but rather by the gap between the frame of the bricks. In certain cases it is possible to fix this by filling the gap with silicone caulking. If this is not working, it must be resealed professionally.
When the sealant on double-glazed windows begins to break down, it allows water ingress. This can result in damp or even mold. This could affect health and can cause damage to the property. It is important to address any water ingress problems as soon as you spot them. And if your windows are still covered by a guarantee, it is worth contacting the company you purchased windows from, as they might pay for the repairs.
The windows themselves are usually covered by a warranty which can last a minimum of 10 years However, certain companies offer lifetime warranties, therefore it is worthwhile checking this information out. If your double glazing falls under warranty, you should contact the company that sold them as fast as you can and inform them about any problems you are having. The ideal approach is to make this contact in person or via letters and emails, to ensure all information is documented and clear.
Also, it is worth noting that draughts are often caused by faulty hinges, and not due to the lack of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but can become stiffer as time passes if they're not regularly oiled. This can cause a gap to be created between the sash frame and the sash, which allows cold air to enter the home. This problem can be solved by replacing these hinges without impacting window seals.